In bootloader mode (or SPL - call it what you want) you will see a white screen with information about the version of the bootloader (bootloader) and the version of the radio module. To get to the bootloader mode, you must simultaneously hold down the volume up and down key of your phone while it is turned on using the power button. I'll tell you how to flash custom firmware on HTC Radar (unlocked European, that is, not tied to a specific mobile operator). Video instructions for installing custom firmware HD2O DynamicsĭFT Freedom Rom Installation Instructions In the Select NBH file field, select RUU Radar. Put a dot in front of the line Custom RUU. Wait until the installation is completed (0% ->100%) on the phoneġ5) Run the TitanAdvancedRUU file which was unzipped earlier. Install HSPL following the instructions on the screen.Ĩ) Enter the bootloader mode (SPL) or turn off the phone and enter the bootloader mode again if you failed to do it in time.ĩ) Unzip the HD2O_Dynamics7_Radar_1_21.rar archive for example to the desktop.ġ0) In the SPL mode (see p2), connect the phone to the PC via a USB cable and run the TitanAdvancedRUU file which was unzipped earlierġ1) Put a point opposite the line Custom RUUġ2) In the Select NBH file field, select RUU Radar Radio 16.23.06 and click nextġ3) Next, in the new window that appears, put ticks everywhere, click next, click upgrade. You will thus fall into bootloader mode (SPL).Ĥ) Follow the unzipped folder to: DFT_HSPL_WP7SG1 \ 1_SPL205 \ OMEGA \ĥ) Connect the phone to the computer via a USB cable and run ROMUpdateUtility.exe on the computerĦ) Wait until the SPL installation procedure is complete (0% ->100%) on the phoneħ) After the installation is completed, the phone will reboot.ħ.1) Follow the unzipped folder to: DFT_HSPL_WP7SG1 \ 2_HSPL \ Run DFT_HSPL_WP7SG1_INSTALL.exe on the computer. USB 3.0 firmware is currently not possible.Ģ) Turn on your HTC Radar while simultaneously pressing the volume up and down keys. Only flash with Windows 7 to avoid problems. You must to check the Update through Zune ( Settings –> Phone –> Update), but after that you must to disconnect your computer from the internet after 2-3 seconds. This is not the fixed time, so you’ll probably need to find your own number of the seconds (in my case it was 9 seconds).All files for the firmware are in the header. Now we are coming to the trickiest part of this process. In the second step you need to connect your Windows Phone to the Zune software. How to Upgrade Nokia phone to THE Windows 7.8įirst of all you need to turn off the WiFi ( Settings –> WiFi –> Off) and the data connection ( mobile network –> Data connection –> Off) on your mobile phone. Here I’ll describe the most user-friendliest solution which solved my issue. I checked if this upgrade is available for my Nokia Lumia 900 and every day I got the same message: “Your phone is up to date.” After three weeks I decided to research if there is an alternative solution for my issue and I found a couple of possible solutions. Nokia announced that this upgrade will be available for their mobile phones during the first three weeks of the February 2013. Recently Microsoft rolled out the Windows Phone 7.8 upgrade for the Windows Phone 7.5 operating system.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |